Authentication failed after C200 update

[millenniumy2k]

Description

After updating my C200 with the latest firmware, authentication no longer works

Reproduction Steps

Expected behavior

Invalid cloud password. Make sure you are entering the password for your cloud account and NOT the password which you created via the camera settings (unless they are the same). You need to enter password which you used with your email when signing into the Tapo app. Ensure you have Third-Party compatibility turned on in Tapo App (Me -> Tapo Lab -> Third-Party Compatibility - On) and you have tried the other solutions suggested in the FAQ https://github.com/JurajNyiri/HomeAssistant-Tapo-Control?tab=readme-ov-file#troubleshooting--faq. If you are adding chime, change username value from admin, to your TPLink email.

If applicable, add error logs.

No response

Device Firmware

1.4.4 build 260527 rel. 28339n

Integration Version

7.1.14

Last known working integration version

7.1.14

Using stream component

Yes

Does camera work via official integrations?

Yes

HASS Environment

HA

Search for similar issues

Yes

Additional information

No response

Debug Logs (Required)

Registratore: aiohttp.server
Fonte: /usr/local/lib/python3.14/site-packages/aiohttp/web_protocol.py:488
Prima occorrenza: 12:23:04 (12 occorrenze)
Ultimo accesso: 12:26:11

Error handling request from 192.168.1.208
Error handling request from 192.168.1.205
Error handling request from 192.168.1.207
Traceback (most recent call last):
File "/usr/local/lib/python3.14/site-packages/aiohttp/web_protocol.py", line 415, in data_received
messages, upgraded, tail = self._request_parser.feed_data(data)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^
File "aiohttp/_http_parser.pyx", line 596, in aiohttp._http_parser.HttpParser.feed_data
aiohttp.http_exceptions.BadHttpMessage: 400, message:
Data after Connection: close:

b'\x00'
      ^

[github-actions]

This issue was automatically closed because it matches a known FAQ solution.

Note: This action has been done automatically, owner is notified about this issue and if there is a need he will reopen.

[millenniumy2k]

The FAQs aren't helpful. They worked fine until now, but only after the firmware update did I have these problems. The other cameras work.

[JurajNyiri]

You need to follow faq, there is nothing else anyone can do for you as the correct password needs to be pushed by tplink into your camera, thus faq steps.

Also no debug or related error logs were provided.

[Westeru]

I had the same problem and it got solved by toggling Third-Party Compatibility from Tapo App -> Me -> Tapo Lab -> Third-Party Compatibility -> On. Just turn it Off and On again

[Freshhat]

I had the same problem and it got solved by toggling Third-Party Compatibility from Tapo App -> Me -> Tapo Lab -> Third-Party Compatibility -> On. Just turn it Off and On again

This solved my issue, should be added to the FAQ ;)

[JurajNyiri]